Japan JIS SKH4 Tungsten series high speed tool steel and SKH4 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | SKH4 | JIS | Japan | Tungsten series high speed tool steel | 
| SKD6 | |||||
| SKD61 | |||||
| SKD62 | |||||
| SKD7 | |||||
| SKD8 | |||||
| SKT3 | |||||
| SKT4 | |||||
| SKT6 | |||||
| SKH2 | |||||
| SKH3 | 
| C(%) | Si(%) | Mn(%) | Cr(%) | V(%) | W(%) | Co(%) | 
|---|---|---|---|---|---|---|
| 0.73-0.83 | Max 0.45 | Max 0.40 | 3.80-4.50 | 1.00-1.50 | 17.00-19.00 | 9.00-11.00 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 562 (≥) | 488 (≥) | 34 | 33 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 32 | - | - | 0.32 | - | |||
| 411 | 636 | - | 31.3 | 342 | - | ||
| 454 | - | 23 | 33.2 | 213 | 343 | 
Heat treated : 1665°C - 1264°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| SKH4 | JIS | Japan | Tungsten series high speed tool steel | 
| SKH40 | JIS | Japan | Powder metallurgy high-speed tool steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com