Available 24/7 at contact@steel-grades.com

Description

Germany AWS DIN EN 2460, DIN 17440 (1996) , DIN EN 10088-1 , DIN EN 10088-2 , DIN EN 10088-3 , DIN EN 10088-4 , DIN EN 10088-5 , DIN EN 10250-4 , DIN EN 10263-5 , DIN EN 10272 , DIN EN 10297-2 (2005) , X12Cr13 Specialsteel Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: X12Cr13
Category Class Grade Standard Country Application
Steel GradesSpecialsteel X12Cr13 AWS Germany Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm

Chemical composition(mass fraction)(wt.%) of the X12Cr13

C Si Mn P S Cr Ni
0.08 -0.15 ≤1.00 ≤1.50 ≤0.040 0.15 -0.35 12.0 -13.0 ≤0.60

Mechanical Properties of steel grade X12Cr13

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
954 (≥) 114 (≥) 34 32 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 243

Physical Properties of steel grade X12Cr13

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
13 - -     0.41 -  
819 939 - 24.3 242   -  
757 - 12 44.2   442 143

Heat Treatment of steel grade X12Cr13

Heat treated : 1189°C - 1737°C

Technological Curves of steel grade X12Cr13

Cross Reference Table (Equivalent Grade) of X12Cr13

Grade Standard Country Application
X12Cr13
X12Cr13
X12Cr13
X12Cr13
G-X 12 Cr 13
G-X 12 Cr 13

Relevant standard of X12Cr13

DIN EN 2460 Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm DIN-EN-2460.pdf
DIN 17440 (1996) Stainless steels - Technical delivery conditions for drawn wire DIN-17440-(1996)-.pdf
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1-.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2-.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3-.pdf
DIN EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes DIN-EN-10088-4-.pdf
DIN EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes DIN-EN-10088-5-.pdf
DIN EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels DIN-EN-10250-4-.pdf
DIN EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels DIN-EN-10263-5-.pdf
DIN EN 10272 Stainless steel bars for pressure purposes DIN-EN-10272-.pdf
DIN EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10297-2-(2005)-.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X12Cr13?
  • List your company on S&G now? Join
  • Non-paying users only
Top