USA ASTM M62 Molybdenum series High-speed tool steel and M62 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | M62 | ASTM | USA | Molybdenum series High-speed tool steel | 
| T11342 | |||||
| M43 | |||||
| T11343 | |||||
| M44 | |||||
| T11344 | |||||
| M46 | |||||
| T11346 | |||||
| M47 | |||||
| T11347 | |||||
| M48 | 
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) | W(%) | 
|---|---|---|---|---|---|---|---|---|
| 1.25-1.35 | 0.15-0.40 | 0.15-0.40 | MAX 0.030 | MAX 0.070 | 3.50-4.00 | 10.0-11.0 | 1.80-2.10 | 5.75-6.50 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 977 (≥) | 183 (≥) | 24 | 23 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 42 | - | - | 0.12 | - | |||
| 956 | 547 | - | 41.3 | 341 | - | ||
| 124 | - | 14 | 12.2 | 411 | 241 | 
Heat treated : 1474°C - 1332°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| M62 | ASTM | USA | Molybdenum series High-speed tool steel | 
| SNCM625 | CNS | China | China Taiwan Structural steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com