EN HS6-6-2
Euronorm EN EN HS6-6-2 Euronorm Tool steel and EN HS6-6-2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category
- Stainless Steel
- Tool Steel
- Carbon Steel
- Alloy Steel
- Mould Steel
- Ti Alloy
- High Alloy
- Structure Steel
- Tool Steel And Hard Alloy
- Special Steel
- Heat-Resistant Steel
- Boiler & Pressure Vessel Plate
- Valve Steel
- Special Alloy
- Tool Die Steels
- Superalloys
- Non-Magnetic Steel
- Caststeel
- Specialsteel
- Steels of Blade for Steam Turb
EN EN HS6-6-2 EN EN HS6-6-2 Datasheet
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | EN HS6-6-2 | EN | Euronorm | Euronorm Tool steel |
| EN HS2-9-1-8 |
|||||
| EN HS2-9-2 |
|||||
| EN HS3-3-2 |
|||||
| EN HS6-5-2 |
|||||
| EN HS6-5-2-5 |
|||||
| EN HS6-5-2C |
|||||
| EN HS6 5-3 |
|||||
| EN HS6-5-3-8 |
|||||
| EN HS6-5-3C |
|||||
| EN HS6-5-4 |
Datasheet for:Steel Grades:Tool Steel And Hard Alloy:EN HS6-6-2
Chemical composition(mass fraction)(wt.%) of the EN HS6-6-2
| C(％) | Si(％) | Mn(％) | P(％) | S(％) |
|---|---|---|---|---|
| 1.00-1.10 | Max 0.46 | Max 0.40 | 0.030 | 0.030 |
Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade EN HS6-6-2
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 578 (≥) | 969 (≥) | 34 | 14 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 31 | - | - | 0.43 | - | |||
| 953 | 672 | - | 12.3 | 334 | - | ||
| 515 | - | 41 | 22.2 | 434 | 412 |
Heat treated : 1518°C - 1997°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| HS6-6-2 | ISO | Korea | Carbide for cutting tools |
| HS6-6-2 | ISO | Korea | Carbide for cutting tools |
| EN HS6-6-2 | EN | Euronorm | Euronorm Tool steel |
Contact Suppliers with your enquiries for EN HS6-6-2 any of the shape and size.
