USA ASTM CM-2 Casting tool steels and powder metallurgy tool steel and CM-2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | CM-2 | ASTM | USA | Casting tool steels and powder metallurgy tool steel | 
| T11347 | |||||
| M48 | |||||
| M62 | |||||
| M50 | |||||
| T11350 | |||||
| M52 | |||||
| T11352 | |||||
| CA-2 | |||||
| CD-2 | |||||
| CD-5 | 
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Co(%) | 
|---|---|---|---|---|---|---|---|---|---|---|
| 0.78-0.88 | Max 1.00 | Max 0.75 | Max 0.030 | Max 0.030 | 3.75-4.50 | Max 0.25 | 4.50-5.50 | 1.25-2.20 | 5.50-6.75 | Max 0.25 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 495 (≥) | 775 (≥) | 12 | 23 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 12 | - | - | 0.24 | - | |||
| 692 | 715 | - | 34.3 | 111 | - | ||
| 226 | - | 32 | 34.2 | 311 | 332 | 
Heat treated : 1394°C - 1181°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| CM-2 | ASTM | USA | Casting tool steels and powder metallurgy tool steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com