France AFNOR G1Z Carbide for cutting tools and G1Z Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | G1Z | AFNOR | France | Carbide for cutting tools |
| WZ1 |
|||||
| WZ2 |
|||||
| WZ2 |
|||||
| E3 |
|||||
| E3 |
|||||
| E6 |
|||||
| E6 |
|||||
| G1Z |
|||||
| G1Z |
|||||
| G1Z |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 887 (≥) | 189 (≥) | 43 | 22 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 413 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 13 | - | - | 0.21 | - | |||
| 514 | 955 | - | 34.3 | 224 | - | ||
| 657 | - | 43 | 43.2 | 144 | 134 |
Heat treated : 1435°C - 1856°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| G1Z | AFNOR | France | Carbide for cutting tools |
| G1Z | AFNOR | France | Carbide for cutting tools |
| G1Z | AFNOR | France | Carbide for cutting tools |
| G1Z | AFNOR | France | Carbide for cutting tools |
| H10 | AFNOR | France | Carbide for cutting tools |
| H10 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com