France AFNOR H10 Carbide for cutting tools and H10 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | H10 | AFNOR | France | Carbide for cutting tools | 
| WZ2 | |||||
| E3 | |||||
| E3 | |||||
| E6 | |||||
| E6 | |||||
| G1Z | |||||
| G1Z | |||||
| G1Z | |||||
| G1Z | |||||
| H10 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 629 (≥) | 829 (≥) | 31 | 43 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 121 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 44 | - | - | 0.33 | - | |||
| 946 | 731 | - | 24.3 | 234 | - | ||
| 493 | - | 13 | 12.2 | 111 | 413 | 
Heat treated : 1988°C - 1428°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| G1Z | AFNOR | France | Carbide for cutting tools | 
| G1Z | AFNOR | France | Carbide for cutting tools | 
| G1Z | AFNOR | France | Carbide for cutting tools | 
| G1Z | AFNOR | France | Carbide for cutting tools | 
| H10 | AFNOR | France | Carbide for cutting tools | 
| H10 | AFNOR | France | Carbide for cutting tools | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com