USA ASTM H10 Tool Die Steels Hot-Work Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Die Steels | H10 | ASTM | USA | Hot-Work Tool Steel |
| C | Si | Mn | P | S | Cr | Mo | V | W | Ni+Cu |
|---|---|---|---|---|---|---|---|---|---|
| 0.35 -0.45 | 0.80 -1.20 | 0.25 -0.70 | ≤0.030 | ≤0.030 | 3.00 -3.75 | 2.00 -3.00 | 0.25 -0.75 | ≤ ≥ | ≤0.75 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 542 (≥) | 538 (≥) | 42 | 34 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 432 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 12 | - | - | 0.21 | - | |||
| 933 | 696 | - | 24.3 | 211 | - | ||
| 572 | - | 12 | 23.2 | 241 | 342 |
Heat treated : 1543°C - 1539°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| UNS H10380 | |||
| UNS H10450 | |||
| UNS H10380 | |||
| UNS H10450 | |||
| ASTM H10 | |||
| ASTM CH10 | |||
| ASTM CPH10 | |||
| AWS EH10K | |||
| SWRCH10R | |||
| SWRCH10A | |||
| SWRCH10K | |||
| SKH10 | |||
| SKH10 | |||
| :BH10 | |||
| :BH10 | |||
| BH10A | |||
| BH10A | |||
| 04X18H10 | |||
| 08X18H10 | |||
| 08X18H10T |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com