China SMC GJB 1539 (1992), Be3 Specialsteel Inertial components used for beryllium bar SPEC and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Specialsteel | Be3 | SMC | China | Inertial components used for beryllium bar SPEC |
Al | Cu | Cr | Fe | Mg | Mn | Ni | Si | O | Be2C |
---|---|---|---|---|---|---|---|---|---|
≤0.0500 | ≤0.0200 | ≤0.0200 | ≤0.1300 | ≤0.0400 | ≤0.0200 | ≤0.0200 | ≤0.0600 | ≤1.2500 | ≤0.1500 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
337 (≥) | 395 (≥) | 42 | 13 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
32 | - | - | 0.13 | - | |||
648 | 486 | - | 14.3 | 321 | - | ||
942 | - | 44 | 33.2 | 311 | 343 |
Heat treated : 1198°C - 1346°C
GJB 1539 (1992) | Inertial components used for beryllium bar SPEC | GJB-1539---(1992).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com