USA GM GMW 3161, GMW3161M-ST-S X6CrNiTi18-10 Specialsteel Stainless Steel for Exhaust Applications and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Type | Standard | Country | Application |
|---|---|---|---|---|---|---|
| Steel Grades | Specialsteel | GMW3161M-ST-S X6CrNiTi18-10 | Austenite | GM | USA | Stainless Steel for Exhaust Applications |
| C | Si | Mn | P | S | Cr | Ni | N | Ti |
|---|---|---|---|---|---|---|---|---|
| ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | 0.01 -0.03 | 17.00 -19.00 | 9.00 -12.00 | ≤0.10 | 0.40 -0.70 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 167 (≥) | 283 (≥) | 32 | 31 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 21 | - | - | 0.11 | - | |||
| 782 | 684 | - | 22.3 | 423 | - | ||
| 655 | - | 22 | 21.2 | 433 | 222 |
Heat treated : 1782°C - 1213°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| X6CrNiTi18-10 | |||
| X6CrNiTi18-10 | |||
| X6CrNiTi18-10 | |||
| X6CrNiTi18a-10 | |||
| X6CrNiTi18a-10 |
| GMW 3161 | Stainless Steel for Exhaust Applications | GMW-3161.pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION
