X2CrNiMo18-15-13

Germany DIN DIN 17443 (1986) X2CrNiMo18-15-13 Wrought stainless steels for surgical implants; technical delivery conditions and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

DIN X2CrNiMo18-15-13 DIN X2CrNiMo18-15-13 Datasheet
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel X2CrNiMo18-15-13 Austenite DIN Germany Wrought stainless steels for surgical implants; technical delivery conditions
Datasheet for:Steel Grades:Specialsteel:X2CrNiMo18-15-13

Chemical composition(mass fraction)(wt.%) of the X2CrNiMo18-15-13

Elements Min.(≥) Max.(≤)
C - 0,030
Si - 1.00
Mn - 2.00
P - 0.025
S - 0.010
Cr 17.00 19.00
Mo 2.50 3.20
Ni 13.00 15.50
N - 0.10
Fe - Bal

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade X2CrNiMo18-15-13

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
269 (≥) 726 (≥) 41 23 21 Solution and Aging, Annealing, Ausaging, Q+T,etc 222
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
33 - -     0.24 -  
611 427 - 13.3 133   -  
946 - 33 32.2   412 432
Heat treated : 1232°C - 1173°C
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
1.4441 LVM DIN Germany
Wrought stainless steels for surgical implants; technical delivery conditions
X2CrNiMo18-15-13 DIN Germany
Wrought stainless steels for surgical implants; technical delivery conditions
X2CrNiMo18-15-3 DIN Germany
Wrought stainless steels for surgical implants; technical delivery conditions
316LVM AISI USA
Wrought stainless steels for surgical implants; technical delivery conditions
00Cr17Ni14Mo2 GB China
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
X2CrNiMo18-14-3 AWS Germany
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
1.4435 AWS Germany
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
Z 3 CND 17-11-02 DIN France
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
TS 60 SS International
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
X2CrNiMo18-14-3 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4435 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X2CrNiMo18-14-3 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4435 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X2CrNiMo18-15-4 AFNOR France
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
1.4438 AFNOR France
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
Relevant standard
Standard No. Description Download
DIN 17443 (1986) Wrought stainless steels for surgical implants; technical delivery conditions
Contact Suppliers with your enquiries for X2CrNiMo18-15-13 any of the shape and size.

Tool & Die Steels Inc.

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
DIN 17443 (1986), X2CrNiMo18-15-13 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
TEL:+86-13880247006
E-mail: [email protected]
Website: https://www.tool-die-steels.com/

Round, Square, Hex, Flat, Hollow

X2CrNiMo18-15-13 Bar

Enquiry

Shaft, Ring, Disks, Cylinder

X2CrNiMo18-15-13 Forged

Enquiry

Special shaped profile steel

X2CrNiMo18-15-13 Steel

Enquiry

High precision machine Forging parts

X2CrNiMo18-15-13 Parts

Enquiry
Join Supplier: [email protected]