AISI 501

USA AISI A 194/A 194M (2014) A 314 (2013) AISI 501 A 194/A 194M (2014) Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel AISI 501 Ferrite AISI USA A 194/A 194M (2014) Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Datasheet for:Steel Grades:Specialsteel:AISI 501

Chemical composition(mass fraction)(wt.%) of the AISI 501

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade AISI 501

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
472 (≥) 866 (≥) 24 14 42 Solution and Aging, Annealing, Ausaging, Q+T,etc 112
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
34 - -     0.13 -  
817 998 - 34.3 422   -  
492 - 13 43.2   142 342
Heat treated : 1634°C - 1899°C
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
S20501 AISI USA
Stainless steel and heat resistant steel
A 314 S50100 SAE USA
Stainless Steel Billets and Bars for Forging
S50100 AISI USA
Chromium Heat Resisting Steel
A 1018 HSLAS Grade 65 [450] Class 1 A SAE USA
Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel
A 501 Grade A SAE USA
Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A 1018 HSLAS Grade 65 [450] Class 1 B SAE USA
Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel
A 501 Grade B SAE USA
Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
X2CrNiMoCuWN25-7-4 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4501 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
2HR501 B.S. UK
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
X2CrNiMoCuWN25-7-4 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4501 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
T31501 UNS USA
Oil-Hardening Tool Steel
AISI 501 AISI USA
A 194/A 194M (2014) Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

Relevant standard

Standard No. Description Download
A 194/A 194M (2014) Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A 314 (2013) Stainless Steel Billets and Bars for Forging
Contact Suppliers with your enquiries for AISI 501 any of the shape and size.

Tool & Die Steels Inc.

Advertising space

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
A 194/A 194M (2014), A 314 (2013), AISI 501 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
Join Supplier: [email protected]

Advertisement

Tags

501