1.4541

France AFNOR NF EN 10028-7 NF EN 10088-1 NF EN 10088-2 NF EN 10088-3 NF EN 10088-4 NF EN 10088-5 NF EN 10216-5 (2004) NF EN 10217-7 NF EN 10222-5 NF EN 10250-4 NF EN 10253-3 NF EN 10253-4 NF EN 10263-5 NF EN 10272 NF EN 10296-2 (2005) NF EN 10297-2 (2005) 1.4541 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4541 Austenite AFNOR France Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
Datasheet for:Steel Grades:Specialsteel:1.4541

Chemical composition(mass fraction)(wt.%) of the 1.4541

Elements Min.(≥) Max.(≤)
C - 0.080
Si - 1.00
Mn - 2.00
P - 0.045
S - 0.015
Cr 17.00 19.00
Mo - -
Ni 9.00 12.00
Ti 5×C 0.70

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade 1.4541

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
756 (≥) 345 (≥) 44 21 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 234
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
12 - -     0.32 -  
646 448 - 13.3 421   -  
824 - 33 22.2   321 433
Heat treated : 1115°C - 1984°C
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
X6CrNiTi18-10 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4541 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X6CrNiTi18-10 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4541 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X6CrNiTi18-10 ISO International
Stainless steels - Chemical composition
X6CrNiTi18 10E ISO International
Steels for cold heading and cold extruding
X6CrNiTi18-10 ISO International
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
X6CrNiTi18-10 ISO International
Stainless steels - Chemical composition
GMW3161M-ST-S X6CrNiTi18-10 GM USA
Stainless Steel for Exhaust Applications

Relevant standard

Standard No. Description Download
NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels
NF EN 10088-1 Stainless steels - Part 1: List of stainless steels
NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
NF EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels
NF EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
NF EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
NF EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
NF EN 10272 Stainless steel bars for pressure purposes
NF EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
NF EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
Contact Suppliers with your enquiries for 1.4541 any of the shape and size.

Tool & Die Steels Inc.

Advertising space

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
NF EN 10028-7, NF EN 10088-1, NF EN 10088-2, NF EN 10088-3, NF EN 10088-4, NF EN 10088-5, NF EN 10216-5 (2004), NF EN 10217-7, NF EN 10222-5, NF EN 10250-4, NF EN 10253-3, NF EN 10253-4, NF EN 10263-5, NF EN 10272, NF EN 10296-2 (2005), NF EN 10297-2 (2005), 1.4541 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
Join Supplier: [email protected]

Advertisement

Tags

X6CrNiTi18-10 1-4541