Available 24/7 at contact@steel-grades.com

Description

France AFNOR NF EN 10028-7, NF EN 10088-1, NF EN 10088-2, NF EN 10088-4, 1.4513 Specialsteel Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4513
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4513 Ferrite AFNOR France Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

Chemical composition(mass fraction)(wt.%) of the 1.4513

C Si Mn P S Cr Mo Ni Ti N
≤0.025 ≤1.00 ≤1.00 ≤0.040 ≤0.015 16.00 -18.00 1.00 -1.50 ≤ ≥ 0.30 -0.60 ≤0.015

Mechanical Properties of steel grade 1.4513

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
369 (≥) 766 (≥) 22 33 13 Solution and Aging, Annealing, Ausaging, Q+T,etc 114

Physical Properties of steel grade 1.4513

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
33 - -     0.43 -  
278 644 - 41.3 241   -  
548 - 34 12.2   322 341

Heat Treatment of steel grade 1.4513

Heat treated : 1621°C - 1422°C

Technological Curves of steel grade 1.4513

Cross Reference Table (Equivalent Grade) of 1.4513

Grade Standard Country Application
X2CrMoTi17-1

Relevant standard of 1.4513

NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels NF-EN-10028-7.pdf
NF EN 10088-1 Stainless steels - Part 1: List of stainless steels NF-EN-10088-1.pdf
NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes NF-EN-10088-2.pdf
NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes NF-EN-10088-4.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4513?
  • List your company on S&G now? Join
  • Non-paying users only
Top