UK B.S. BS EN 10028-7, BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 10216-5 (2004), BS EN 10217-7, BS EN 10250-4, BS EN 10253-3, BS EN 10253-4, BS EN 10272, BS EN 10297-2 (2005), X2CrNiMoCuWN25-7-4 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Type | Standard | Country | Application | 
|---|---|---|---|---|---|---|
| Steel Grades | Specialsteel | X2CrNiMoCuWN25-7-4 | Duplex steel | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | 
| C | Si | Mn | P | S | Cr | Ni | Mo | N | W | Cu | 
|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.03 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.015 | 24.00 -26.00 | 6.00 -8.00 | 3.00 -4.00 | 0.20 -0.30 | 0.50 -1.00 | 0.50 -1.00 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 663 (≥) | 234 (≥) | 44 | 34 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 34 | - | - | 0.22 | - | |||
| 197 | 389 | - | 21.3 | 413 | - | ||
| 691 | - | 24 | 24.2 | 442 | 433 | 
Heat treated : 1424°C - 1537°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| X2CrNiMoCuWN25-7-4 | |||
| X2CrNiMoCuWN25-7-4 | 
| BS EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels | BS-EN-10028-7.pdf | 
| BS EN 10088-1 | Stainless steels - Part 1: List of stainless steels | BS-EN-10088-1.pdf | 
| BS EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | BS-EN-10088-2.pdf | 
| BS EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | BS-EN-10088-3.pdf | 
| BS EN 10216-5 (2004) | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes | BS-EN-10216-5-(2004).pdf | 
| BS EN 10217-7 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | BS-EN-10217-7.pdf | 
| BS EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels | BS-EN-10250-4.pdf | 
| BS EN 10253-3 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements | BS-EN-10253-3.pdf | 
| BS EN 10253-4 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | BS-EN-10253-4.pdf | 
| BS EN 10272 | Stainless steel bars for pressure purposes | BS-EN-10272.pdf | 
| BS EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | BS-EN-10297-2-(2005).pdf | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com