Available 24/7 at contact@steel-grades.com

Description

Germany DIN DIN EN 10088-1, DIN EN 10088-2, DIN EN 10088-3, 1.4361 Specialsteel Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4361
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4361 Austenite DIN Germany Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Chemical composition(mass fraction)(wt.%) of the 1.4361

C Si Mn P S Cr Mo Ni N
≤0.015 3.70 -4.50 ≤2.00 ≤0.025 ≤0.010 16.5 -18.5 ≤0.20 14.0 -16.0 ≤0.11

Mechanical Properties of steel grade 1.4361

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
791 (≥) 296 (≥) 21 23 43 Solution and Aging, Annealing, Ausaging, Q+T,etc 134

Physical Properties of steel grade 1.4361

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
41 - -     0.34 -  
855 989 - 32.3 231   -  
791 - 44 12.2   443 214

Heat Treatment of steel grade 1.4361

Heat treated : 1414°C - 1227°C

Technological Curves of steel grade 1.4361

Cross Reference Table (Equivalent Grade) of 1.4361

Grade Standard Country Application
X1CrNiSi18-15-4
X1CrNiSi18-15-4
X1CrNiSi18-15-4

Relevant standard of 1.4361

DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4361?
  • List your company on S&G now? Join
  • Non-paying users only
Top