X2CrNiN18-10

Germany AWS DIN EN 10088-1 DIN EN 10088-2 DIN EN 10088-3 DIN EN 10088-4 DIN EN 10088-5 DIN 1654-5 (1955) DIN 17440 (1955) DIN 17441 (1955) DIN 17455 (1955) DIN 17456 (1955) DIN 17457 (1985) DIN 17458 (1985) DIN EN 10028-7 DIN EN 10216-5 (2004) DIN EN 10217-7 DIN EN 10222-5 DIN EN 10250-4 DIN EN 10253-3 DIN EN 10253-4 DIN EN 10272 DIN EN 10296-2 (2005) DIN EN 10297-2 (2005) X2CrNiN18-10 Cold heading and cold extruding steels; technical delivery conditions for stainless steels and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Category Class Grade Standard Country Application
Steel GradesSpecialsteel X2CrNiN18-10 AWS Germany Cold heading and cold extruding steels; technical delivery conditions for stainless steels
Datasheet for:Steel Grades:Specialsteel:X2CrNiN18-10

Chemical composition(mass fraction)(wt.%) of the X2CrNiN18-10

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade X2CrNiN18-10

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
924 (≥) 749 (≥) 23 24 24 Solution and Aging, Annealing, Ausaging, Q+T,etc 224
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
34 - -     0.14 -  
291 242 - 22.3 343   -  
639 - 43 24.2   243 234
Heat treated : 1494°C - 1952°C
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
X2CrNiN18-10 AWS Germany
Cold heading and cold extruding steels; technical delivery conditions for stainless steels
1.4311 AWS Germany
Cold heading and cold extruding steels; technical delivery conditions for stainless steels
X2CrNiN18-10 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4311 B.S. UK
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X2CrNiN18-10 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4311 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X2CrNiN18-10 ISO International
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes

Relevant standard

Standard No. Description Download
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
DIN 1654-5 (1955) Cold heading and cold extruding steels; technical delivery conditions for stainless steels
DIN 17440 (1955) Stainless steels - Technical delivery conditions for drawn wire
DIN 17441 (1955) Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
DIN 17455 (1955) Welded circular tubes of stainless steels for general requirements; technical delivery conditions
DIN 17456 (1955) Seamless circular tubes of stainless steels for general requirements; technical delivery conditions
DIN 17457 (1985) Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
DIN 17458 (1985) Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
DIN EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels
DIN EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
DIN EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DIN EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels
DIN EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
DIN EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DIN EN 10272 Stainless steel bars for pressure purposes
DIN EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
Contact Suppliers with your enquiries for X2CrNiN18-10 any of the shape and size.

Tool & Die Steels Inc.

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
X2CrNiN18-10 Round Bar X2CrNiN18-10 Flat Bar X2CrNiN18-10 Hollow Bar X2CrNiN18-10 Tube / Pipe X2CrNiN18-10 Sheet / Plate X2CrNiN18-10 Strip / Coil X2CrNiN18-10 Wire X2CrNiN18-10 Forging X2CrNiN18-10 Tube / Pipe X2CrNiN18-10 Fastener / Bolt / Nut / Screw Welding Parts
M/B:+86-13880247006
E-mail: [email protected]
Website: https://www.tool-die-steels.com/

Advertising space

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
DIN EN 10088-1, DIN EN 10088-2, DIN EN 10088-3, DIN EN 10088-4, DIN EN 10088-5, DIN 1654-5 (1955), DIN 17440 (1955), DIN 17441 (1955), DIN 17455 (1955), DIN 17456 (1955), DIN 17457 (1985), DIN 17458 (1985), DIN EN 10028-7, DIN EN 10216-5 (2004), DIN EN 10217-7, DIN EN 10222-5, DIN EN 10250-4, DIN EN 10253-3, DIN EN 10253-4, DIN EN 10272, DIN EN 10296-2 (2005), DIN EN 10297-2 (2005), X2CrNiN18-10 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
Join Supplier: [email protected]

Advertisement

Tags

X2CrNiN18-10 1-4311