Available 24/7 at contact@steel-grades.com

X2CrNiMoN17-13-5

Description

Germany AWS DIN 17440 (1996), DIN 17441 (1997), DIN 17455 (1985), DIN 17456 (1985), DIN 17457 (1985), DIN 17458 (1985), DIN EN 10028-7, DIN EN 10088-1, DIN EN 10088-2, DIN EN 10088-3, DIN EN 10088-4, DIN EN 10088-5, DIN EN 10216-5 (2004), DIN EN 10217-7, DIN EN 10253-3, DIN EN 10253-4, DIN EN 10272, DIN EN 10296-2 (2005), DIN EN 10297-2 (2005), X2CrNiMoN17-13-5 Specialsteel Stainless steels - Technical delivery conditions for drawn wire and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: X2CrNiMoN17-13-5
Category Class Grade Standard Country Application
Steel GradesSpecialsteel X2CrNiMoN17-13-5 AWS Germany Stainless steels - Technical delivery conditions for drawn wire

Chemical composition(mass fraction)(wt.%) of the X2CrNiMoN17-13-5

C Si Mn P S Cr Ni Mo N
≤0.030 ≤1.00 ≤2.00 ≤0.045 ≤0.015 16.5 -18.5 12.5 -14.5 4.00 -5.00 0.12 -0.22

Mechanical Properties of steel grade X2CrNiMoN17-13-5

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
882 (≥) 653 (≥) 42 31 43 Solution and Aging, Annealing, Ausaging, Q+T,etc 433

Physical Properties of steel grade X2CrNiMoN17-13-5

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
34 - -     0.42 -  
383 241 - 33.3 414   -  
468 - 12 24.2   141 234

Heat Treatment of steel grade X2CrNiMoN17-13-5

Heat treated : 1512°C - 1297°C

Technological Curves of steel grade X2CrNiMoN17-13-5

Cross Reference Table (Equivalent Grade) of X2CrNiMoN17-13-5

Grade Standard Country Application
X2CrNiMoN17-13-5
X2CrNiMoN17-13-5

Relevant standard of X2CrNiMoN17-13-5

DIN 17440 (1996) Stainless steels - Technical delivery conditions for drawn wire DIN-17440-(1996).pdf
DIN 17441 (1997) Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes DIN-17441-(1997).pdf
DIN 17455 (1985) Welded circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17455-(1985).pdf
DIN 17456 (1985) Seamless circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17456-(1985).pdf
DIN 17457 (1985) Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions DIN-17457-(1985).pdf
DIN 17458 (1985) Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions DIN-17458-(1985).pdf
DIN EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels DIN-EN-10028-7.pdf
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3.pdf
DIN EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes DIN-EN-10088-4.pdf
DIN EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes DIN-EN-10088-5.pdf
DIN EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes DIN-EN-10216-5-(2004).pdf
DIN EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes DIN-EN-10217-7.pdf
DIN EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements DIN-EN-10253-3.pdf
DIN EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements DIN-EN-10253-4.pdf
DIN EN 10272 Stainless steel bars for pressure purposes DIN-EN-10272.pdf
DIN EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10296-2-(2005).pdf
DIN EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10297-2-(2005).pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X2CrNiMoN17-13-5?
  • List your company on S&G now? Join
  • Non-paying users only
Top