USA UNS SAE J 437 (1970), H11 Specialsteel Selection and heat treatment of tool and die steels and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Type | Standard | Country | Application | 
|---|---|---|---|---|---|---|
| Steel Grades | Specialsteel | H11 | Precipitation-Hardening | UNS | USA | Selection and heat treatment of tool and die steels | 
| C | Si | Mn | P | S | Ni | Cr | Al | Cu | Ti | Fe | Mo | Co | V | 
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.40 | ≤0.90 | ≤0.30 | ≤ ≥ | ≤ ≥ | ≤ ≥ | ≤5.00 | ≤ ≥ | ≤ ≥ | ≤ ≥ | ≤remaining | ≤1.30 | ≤ ≥ | ≤0.50 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 723 (≥) | 573 (≥) | 32 | 24 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 21 | - | - | 0.42 | - | |||
| 823 | 836 | - | 14.3 | 314 | - | ||
| 593 | - | 23 | 31.2 | 212 | 114 | 
Heat treated : 1757°C - 1648°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| H-11 | 
| SAE J 437 (1970) | Selection and heat treatment of tool and die steels | SAE-J-437-(1970).pdf | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com