USA SAE A 752M (2010), A 752 Grade 94B30 Specialsteel General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Type | Standard | Country | Application | 
|---|---|---|---|---|---|---|
| Steel Grades | Specialsteel | A 752 Grade 94B30 | Precipitation-Hardening | SAE | USA | General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] | 
| C | Si | Mn | P | S | Ni | Cr | Al | Cu | Ti | Fe | N | Mo | 
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.01 | ≤0.20 | ≤0.30 | ≤ ≥ | ≤ ≥ | ≤0.15 | 28.00 -30.00 | ≤ ≥ | ≤0.15 | ≤ ≥ | ≤ ≥ | ≤0.02 | 3.50 -4.20 | 
| Yield Rp0.2 (MPa)  | 
                                            Tensile Rm (MPa)  | 
                                            Impact KV/Ku (J)  | 
                                            Elongation A (%)  | 
                                            Reduction in cross section on fracture Z (%)  | 
                                            As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 489 (≥) | 212 (≥) | 43 | 22 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 | 
| Temperature (°C)  | 
                                        Modulus of elasticity (GPa)  | 
                                        Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C)  | 
                                        Specific thermal capacity (J/kg·°C)  | 
                                        Specific electrical resistivity (Ω mm²/m)  | 
                                        Density (kg/dm³)  | 
                                        Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 44 | - | - | 0.44 | - | |||
| 162 | 442 | - | 34.3 | 314 | - | ||
| 531 | - | 34 | 31.2 | 331 | 341 | 
Heat treated : 1528°C - 1963°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| 29-4 | |||
| 29-4C | |||
| 29-4-2 | |||
| 29-4 | |||
| 29-4-2 | |||
| 29-4C | |||
| 29-4 | |||
| 29-4-2 | |||
| 29-4 | |||
| 29-4-2 | |||
| 29-4C(S44735) | |||
| 29-4-2(S44800) | |||
| X2CrMoTi29-4 | |||
| X2CrMoTi29-4 | 
| A 752M (2010) | General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] | A-752M-(2010).pdf | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com