France AFNOR TG1 Carbide for cutting tools and TG1 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | TG1 | AFNOR | France | Carbide for cutting tools | 
| Z110WKCDV07-05-04-04-02 | |||||
| Z110WKCDV07-05-04-04-02 | |||||
| HS2-9-1-8 | |||||
| HS2-9-1-8 | |||||
| HS10-4-3-10 | |||||
| HS7-6-3-12 | |||||
| HS7-6-3-12 | |||||
| HS12-1-5-5 | |||||
| HS12-1-5-5 | |||||
| TG1 | 
| Co(%) | 
|---|
| 6 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 175 (≥) | 692 (≥) | 22 | 12 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 33 | - | - | 0.21 | - | |||
| 332 | 992 | - | 22.3 | 133 | - | ||
| 712 | - | 32 | 41.2 | 333 | 443 | 
Heat treated : 1129°C - 1617°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| HS6-5-4-2 | AFNOR | France | Carbide for cutting tools | 
| HS6-5-4-2 | AFNOR | France | Carbide for cutting tools | 
| TG1 | AFNOR | France | Carbide for cutting tools | 
| TG1 | AFNOR | France | Carbide for cutting tools | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com