USA UNS T30109 Alloy tool steel and T30109 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | T30109 | UNS | USA | Alloy tool steel | 
| T30104 | |||||
| A5 | |||||
| T30105 | |||||
| A6 | |||||
| T30106 | |||||
| A7 | |||||
| T30107 | |||||
| A8 | |||||
| T30108 | |||||
| A9 | 
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | 
|---|---|---|---|---|---|---|---|---|
| 0.45~0.55 | 0.95~1.15 | 0.20~0.50 | ≤0.030 | ≤0.030 | 4.75~5.50 | 1.25~1.75 | 1.30~1.80 | 0.80~1.40 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 655 (≥) | 955 (≥) | 31 | 23 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 43 | - | - | 0.31 | - | |||
| 418 | 728 | - | 43.3 | 214 | - | ||
| 873 | - | 13 | 13.2 | 322 | 431 | 
Heat treated : 1724°C - 1527°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com