USA UNS T12015 Tungsten series High-Speed Tool Steel and T12015 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | T12015 | UNS | USA | Tungsten series High-Speed Tool Steel | 
| T12002 | |||||
| T2 | |||||
| T4 | |||||
| T12004 | |||||
| T5 | |||||
| T12005 | |||||
| T6 | |||||
| T12006 | |||||
| T12008 | |||||
| T15 | 
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) | W(%) | Co(%) | 
|---|---|---|---|---|---|---|---|---|---|
| 1.50~1.60 | 0.15~0.40 | 0.15~0.40 | ≤0.030 | ≤0.030 | 3.75~5.00 | ≤1.00 | 4.50~5.25 | 11.75~13.0 | 4.75~5.25 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 958 (≥) | 364 (≥) | 43 | 24 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 31 | - | - | 0.34 | - | |||
| 999 | 739 | - | 12.3 | 414 | - | ||
| 439 | - | 33 | 42.2 | 114 | 441 | 
Heat treated : 1126°C - 1349°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com