Japan JIS ST30E Carbide for cutting tools and ST30E Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | ST30E | JIS | Japan | Carbide for cutting tools | 
| H3 | |||||
| H3 | |||||
| ST10E | |||||
| ST10E | |||||
| ST15E | |||||
| ST15E | |||||
| ST20E | |||||
| ST25E | |||||
| ST25E | |||||
| ST30E | 
| W(%) | Other(%) | 
|---|---|
| 72 | TiC+Ta(Nb)C:19.5,Co+Ni:8.5 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 487 (≥) | 182 (≥) | 12 | 42 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 44 | - | - | 0.21 | - | |||
| 149 | 346 | - | 41.3 | 411 | - | ||
| 733 | - | 42 | 44.2 | 234 | 341 | 
Heat treated : 1412°C - 1183°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| ST30E | JIS | Japan | Carbide for cutting tools | 
| ST30E | JIS | Japan | Carbide for cutting tools | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com