China SM3Cr2Ni1Mo Plastic mould with flat steel and SM3Cr2Ni1Mo Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | SM3Cr2Ni1Mo | China | Plastic mould with flat steel | |
| 4Cr5MoSiV | |||||
| 4Cr5MoSiV1 | |||||
| 4Cr5W2VSi | |||||
| 7Mn15Cr2A13V2WMo | |||||
| 3Cr2Mo | |||||
| SM45 | |||||
| SM50 | |||||
| SM55 | |||||
| SM1CrNi3 | |||||
| SM3Cr2Mo | 
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | 
|---|---|---|---|---|---|---|---|
| 0.32~0.42 | 0.20~0.80 | 1.00~1.50 | ≤0.030 | ≤0.030 | 1.40~2.00 | 0.80~1.20 | 0.30~0.55 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 579 (≥) | 485 (≥) | 31 | 23 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 22 | - | - | 0.13 | - | |||
| 524 | 971 | - | 24.3 | 222 | - | ||
| 127 | - | 44 | 22.2 | 242 | 412 | 
Heat treated : 1564°C - 1225°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| SM3Cr2Ni1Mo | China | Plastic mould with flat steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com