USA AISI CY-5 W-Ti-Co class carbide and CY-5 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | CY-5 | AISI | USA | W-Ti-Co class carbide |
| CX-3 |
|||||
| CX-4 |
|||||
| CX-5 |
|||||
| CX-6 |
|||||
| CX-7 |
|||||
| CX-8 |
|||||
| CY-1 |
|||||
| CY-2 |
|||||
| CY-3 |
|||||
| CY-4 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 466 (≥) | 828 (≥) | 22 | 44 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 213 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 41 | - | - | 0.32 | - | |||
| 718 | 933 | - | 21.3 | 334 | - | ||
| 127 | - | 31 | 14.2 | 232 | 421 |
Heat treated : 1653°C - 1813°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| CY-5 | AISI | USA | W-Ti-Co class carbide |
| CY-5SnBiM | AISI | USA | |
| CY-5SnBiM | ASTM | USA | Castings, Nickel and Nickel Alloy |
| CY-5SnBiM | ASTM | USA | Castings, Nickel and Nickel Alloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com