USA AISI C-5A Machining with carbide and C-5A Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | C-5A | AISI | USA | Machining with carbide | 
| CZ-3 | |||||
| CZ-4 | |||||
| CZ-5 | |||||
| CZ-6 | |||||
| C-1 | |||||
| C-2 | |||||
| C-3 | |||||
| C-4 | |||||
| C-5 | |||||
| C-50 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 961 (≥) | 877 (≥) | 42 | 21 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 13 | - | - | 0.34 | - | |||
| 525 | 397 | - | 14.3 | 422 | - | ||
| 786 | - | 22 | 13.2 | 143 | 311 | 
Heat treated : 1393°C - 1163°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com