France AFNOR 100Cr6 Carbide for cutting tools and 100Cr6 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | 100Cr6 | AFNOR | France | Carbide for cutting tools | 
| X37 | |||||
| X40P | |||||
| X40P | |||||
| X41 | |||||
| X41 | |||||
| X45 | |||||
| X45 | |||||
| X50P | |||||
| X50P | |||||
| 100Cr6 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 213 (≥) | 349 (≥) | 23 | 34 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 44 | - | - | 0.12 | - | |||
| 918 | 265 | - | 14.3 | 244 | - | ||
| 965 | - | 42 | 44.2 | 121 | 431 | 
Heat treated : 1422°C - 1212°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| 100Cr6 | AFNOR | France | Carbide for cutting tools | 
| 100Cr6 | AFNOR | France | Carbide for cutting tools | 
| EN 100Cr6 | EN | Euronorm | Euronorm Tool steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com