This page provides X12CrNiMoV12-3 datasheet, X12CrNiMoV12-3 mechanical properties, chemical element X12CrNiMoV12-3, technical specifications of X12CrNiMoV12-3 steel material properties. X12CrNiMoV12-3 performance specifications.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Steel | X12CrNiMoV12-3 | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999)) |
X3CrNiMoBN17-13-3 |
|||||
X5CrNi18-10 |
|||||
X5CrNiMo17-12-2 |
|||||
X6CrNi18-10 |
|||||
X6CrNiMoB17-12-2 |
|||||
X6CrNiTiB18-10 |
|||||
X6NiCrTiMoB25-15-2 |
|||||
X7CrNiMoBNb16-6 |
|||||
X8Ni9 |
|||||
X10CrNiMoMnNbVB15-10-1 |
Chemical composition(mass fraction)(wt.%) of the X12CrNiMoV12-3
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | N(%) |
---|---|---|---|---|---|---|---|---|---|
0.08-0.15 | Max 0.50 | 0.40-0.90 | Max 0.025 | Max 0.015 | 11.0-12.5 | 2.00-3.00 | 1.50-2.00 | 0.25-0.40 | 0.020-0.040 |
Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade X12CrNiMoV12-3
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
558 (≥) | 918 (≥) | 11 | 23 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
32 | - | - | 0.11 | - | |||
455 | 323 | - | 12.3 | 334 | - | ||
221 | - | 41 | 42.2 | 424 | 321 |
Grade | Standard | Country | Application |
---|---|---|---|
X12CrNiMoV12-3/X11CrNiMoN12 | DIN | Germany | The high-temperature and high-strength steel |
X12CrNiMoV12-3 | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999)) |
ISO X12CrNiMoV12 3 | ISO | ISO | High temperature bainite and martensite steel ISO standard internal combustion engine |
EN X12CrNiMoV12-3 | EN | Euronorm | Euronorm Stainless Steel |
EN X12CrNiMoV12-3 | EN | Euronorm | Euronorm Stainless Steel |
Join Supplier: sales@steel-grades.comHaihong International Trade (HK) CO., Limited