FCDA-NiCrNb20-2 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Carbon Steel | FCDA-NiCrNb20-2 | |||
| FCA-NiCuCr15-6-2 | 
                                |||||
| FCA-NiCuCr15-6-3 | 
                                |||||
| FCA-NiCr20-2 | 
                                |||||
| FCA-NiCr20-3 | 
                                |||||
| FCA-NiSiCr20-5-3 | 
                                |||||
| FCA-NiCr30-3 | 
                                |||||
| FCA-NiSiCr30-5-5 | 
                                |||||
| FCA-Ni35 | 
                                |||||
| FCDA-NiMn13-7 | 
                                |||||
| FCDA-NiCr20-2 | 
                                
| 
				C ≤  | 
			
				Si ≤  | 
			
				Mn ≤  | 
			
				P ≤  | 
			
				S ≤  | 
			Cr | Ni | 
|---|---|---|---|---|---|---|
| 3.0 | 1.5-2.4 | 0.5-1.5 | 0.04 | 1.0-2.5 | 18-22 | |
| Mg | Al | Cu | Nb | Ti | V | Ce | 
| ≤0.08 | 0.1-0.2 | |||||
| N | Co | Pb | B | Other | ||
| Yield Rp0.2 (MPa)  | 
                                            Tensile Rm (MPa)  | 
                                            Impact KV/Ku (J)  | 
                                            Elongation A (%)  | 
                                            Reduction in cross section on fracture Z (%)  | 
                                            As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 652 (≥) | 617 (≥) | 22 | 13 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 | 
| Temperature (°C)  | 
                                        Modulus of elasticity (GPa)  | 
                                        Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C)  | 
                                        Specific thermal capacity (J/kg·°C)  | 
                                        Specific electrical resistivity (Ω mm²/m)  | 
                                        Density (kg/dm³)  | 
                                        Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 23 | - | - | 0.11 | - | |||
| 933 | 261 | - | 33.3 | 312 | - | ||
| 921 | - | 43 | 42.2 | 242 | 222 | 
Heat treated : 1421°C - 1318°C
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com