19Cr-10Ni+Mo Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Carbon Steel | 19Cr-10Ni+Mo | |||
| 28Cr | 
                                |||||
| ASTM   CA-40 | 
                                |||||
| 12Cr | 
                                |||||
| ASTM   CA-40F | 
                                |||||
| 12Cr(Cutting type) | 
                                |||||
| ASTM   CF-3 | 
                                |||||
| 19Cr-9Ni | 
                                |||||
| ASTM   CF-10SMnN | 
                                |||||
| 17Cr-8.5Ni+N | 
                                |||||
| ASTM   CF-3M | 
                                
| 
						C ≤  | 
					
						Si ≤  | 
					
						Mn ≤  | 
					
						P ≤  | 
					
						S ≤  | 
					Cr | Ni | 
|---|---|---|---|---|---|---|
| 0.03 | 1.5 | 1.5 | 0.04 | 0.04 | 17.0-21.0 | 9.0-13.0 | 
| Mo | Al | Cu | Nb | Ti | V | Se | 
| 2.0-3.0 | ||||||
| N | Co | Pb | B | Other | ||
| Yield Rp0.2 (MPa)  | 
                                            Tensile Rm (MPa)  | 
                                            Impact KV/Ku (J)  | 
                                            Elongation A (%)  | 
                                            Reduction in cross section on fracture Z (%)  | 
                                            As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 828 (≥) | 853 (≥) | 44 | 31 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 | 
| Temperature (°C)  | 
                                        Modulus of elasticity (GPa)  | 
                                        Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C)  | 
                                        Specific thermal capacity (J/kg·°C)  | 
                                        Specific electrical resistivity (Ω mm²/m)  | 
                                        Density (kg/dm³)  | 
                                        Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 42 | - | - | 0.41 | - | |||
| 748 | 657 | - | 33.3 | 133 | - | ||
| 525 | - | 21 | 33.2 | 332 | 321 | 
Heat treated : 1498°C - 1762°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| 19Cr-10Ni+Mo | China | ||
| 19Cr-10Ni+Mo+N | AISI | USA | |
| 19Cr-10Ni+Mo+N | AISI | USA | |
| 19Cr-10Ni+Mo | AISI | USA | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com