Available 24/7 at contact@steel-grades.com
  • FV 520B
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Description: High strength, high toughness, high abrasion resistance, high corrosion resistance, welding performance is very good
  • PH 15-7 Mo
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5812G (2009) - Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
  • Description: Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
  • PH 15-7 Mo
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5657C (1960) - Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1Al
  • Description: Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1Al
  • PH 15-7 Mo
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5520G (2009) - Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AI Solution Heat Treated, Precipitation Hardenable
  • Description: Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AI Solution Heat Treated, Precipitation Hardenable
  • PH 14-8 Mo
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5603E - Sheet and Strip 15Cr - 8,4Ni - 2,2Mo - 1,1Al, vac. Induct. Melted, Solution Heat Treated
  • Description: Sheet and Strip 15Cr - 8,4Ni - 2,2Mo - 1,1Al, vac. Induct. Melted, Solution Heat Treated
  • PH 13-8Mo
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5840E (2010) - Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
  • Description: Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
  • Ni Span C902
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5225F (2009) - Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction
  • Description: Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction
  • Ni Span C902
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5223F (2002) - Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated, Cold Rolled, 10% Reduction
  • Description: Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated, Cold Rolled, 10% Reduction
  • Ni Span C902
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5221E (2001) - Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated
  • Description: Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated
  • Nichrome V
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5682E (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 78Ni - 20Cr
  • Description: Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 78Ni - 20Cr
  • Nichrome V
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5677D (1953) - Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 75ni 19.5cr 1.6(Cb + Ta)
  • Description: Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 75ni 19.5cr 1.6(Cb + Ta)
  • Nichrome V
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5676F (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 80Ni - 20Cr
  • Description: Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 80Ni - 20Cr
  • Nichrome V
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5682E (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 78Ni - 20Cr
  • Description: Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 78Ni - 20Cr
  • Nichrome V
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5677D (1953) - Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 75ni 19.5cr 1.6(Cb + Ta)
  • Description: Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 75ni 19.5cr 1.6(Cb + Ta)
  • Nichrome V
  • Steel type: Specialsteel
  • Country/Region: USA - ASTM
  • Standard: SAE AMS 5676F (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 80Ni - 20Cr
  • Description: Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 80Ni - 20Cr
Top