USA ASTM H10 Alloy tool steel and H10 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | H10 | ASTM | USA | Alloy tool steel |
| YG6 |
|||||
| YG8A |
|||||
| ASTM W1-A |
|||||
| UNS T72301 |
|||||
| W1-C |
|||||
| W2-A |
|||||
| UNS T72302 |
|||||
| W2-C |
|||||
| W5 |
|||||
| T72305 |
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | Cu(%) |
|---|---|---|---|---|---|---|---|---|---|
| 0.35~0.45 | 0.80~1.20 | 0.25~0.70 | ≤0.030 | ≤0.030 | 3.00~3.75 | ≤0.75 | 2.00~3.00 | 0.25~0.75 | ≤0.75 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 399 (≥) | 576 (≥) | 14 | 13 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 423 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 21 | - | - | 0.34 | - | |||
| 151 | 686 | - | 33.3 | 412 | - | ||
| 936 | - | 12 | 21.2 | 443 | 344 |
Heat treated : 1344°C - 1658°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| H10 | ASTM | USA | Alloy tool steel |
| A8 | ASTM | USA | Alloy tool steel |
| CA85T | AS | Australia | Australia Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com