ISO UNI 50WCrV8 Carbide for cutting tools and 50WCrV8 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Tool Steel And Hard Alloy | 50WCrV8 | UNI | ISO | Carbide for cutting tools | 
| C80U | |||||
| C90U | |||||
| C90U | |||||
| C105U | |||||
| C105U | |||||
| C120U | |||||
| C120U | |||||
| 105V | |||||
| 105V | |||||
| 50WCrV8 | 
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | V(%) | W(%) | 
|---|---|---|---|---|---|---|---|
| 0.45-0.55 | 0.70-1.00 | 0.15-0.45 | ≤0.030 | ≤0.030 | 0.90-1.20 | 0.10-0.20 | 1.70-2.20 | 
| Yield Rp0.2 (MPa) | Tensile Rm (MPa) | Impact KV/Ku (J) | Elongation A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 984 (≥) | 297 (≥) | 12 | 13 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 | 
| Temperature (°C) | Modulus of elasticity (GPa) | Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) | Specific thermal capacity (J/kg·°C) | Specific electrical resistivity (Ω mm²/m) | Density (kg/dm³) | Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 23 | - | - | 0.33 | - | |||
| 976 | 627 | - | 14.3 | 142 | - | ||
| 783 | - | 23 | 21.2 | 314 | 223 | 
Heat treated : 1765°C - 1791°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| 50WCrV8 | UNI | ISO | Carbide for cutting tools | 
| 50WCrV8 | UNI | ISO | Carbide for cutting tools | 
| EN 50WCrV8 | EN | Euronorm | Euronorm Tool steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com