Category
UNS J93005
This page provides UNS J93005 datasheet, UNS J93005 mechanical properties, chemical element UNS J93005, technical specifications of UNS J93005 steel material properties. UNS J93005 performance specifications.
AISI UNS J93005
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Special Alloy | UNS J93005 | AISI | USA | |
| UNS J95405 |
|||||
| ASTM HU |
|||||
| 12Cr-60Ni |
|||||
| ASTM HW |
|||||
| 17Cr-60Ni |
|||||
| ASTM HX |
|||||
| ASTM HC |
|||||
| UNS J92605 |
|||||
| 28Cr |
|||||
| ASTM HD |
Datasheet for:Steel Grades:Special Alloy:UNS J93005
Chemical composition(mass fraction)(wt.%) of the UNS J93005
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
|---|---|---|---|---|---|---|---|
| Max 0.50 | Max 2.00 | Max 1.50 | Max 0.04 | Max 0.040 | 26.0-30.0 | 4.0-7.0 | Max 0.50 |
Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade UNS J93005
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 912 (≥) | 254 (≥) | 12 | 42 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 14 | - | - | 0.41 | - | |||
| 521 | 523 | - | 41.3 | 434 | - | ||
| 781 | - | 43 | 24.2 | 224 | 442 |
Heat treated : 1847°C - 1396°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| UNS G10300 | UNS | USA | General use carbon steel bar |
| UNS G10050 | UNS | USA | General use carbon steel bar |
| UNS G10060 | UNS | USA | General use carbon steel bar |
| UNS G10080 | UNS | USA | General use carbon steel bar |
| UNS G10100 | UNS | USA | General use carbon steel bar |
| UNS G10110 | UNS | USA | General use carbon steel bar |
| ASTM 1012 | ASTM | USA | General use carbon steel bar |
| UNS G10120 | UNS | USA | General use carbon steel bar |
| UNS G10130 | UNS | USA | General use carbon steel bar |
| UNS G10150 | UNS | USA | General use carbon steel bar |
| UNS G10160 | UNS | USA | General use carbon steel bar |
| UNS G10170 | UNS | USA | General use carbon steel bar |
| UNS G10180 | UNS | USA | General use carbon steel bar |
| UNS G10190 | UNS | USA | General use carbon steel bar |
| UNS G10200 | UNS | USA | General use carbon steel bar |
| UNS G10210 | UNS | USA | General use carbon steel bar |
| UNS T72301 | UNS | USA | Carbon tool steel |
| W2-A | ASTM | USA | Carbon tool steel |
| UNS T72302 | UNS | USA | Carbon tool steel |
| UNS S42800 | UNS | USA | Martensitic special steel |
UNS J93005
Join Supplier: [email protected]Haihong International Trade (HK) CO., Limited
