ASTM Class1 Mould Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Mould Steel | ASTM Class1 | |||
| UNS   F43005 | 
                                |||||
| ASTM   D-5 | 
                                |||||
| UNS   F43006 | 
                                |||||
| ASTM   D-5B | 
                                |||||
| UNS   F43007 | 
                                |||||
| ASTM   D-5S | 
                                |||||
| ASTM   Class1 | 
                                |||||
| ASTM   Class2 | 
                                |||||
| ASTM   Class3 | 
                                |||||
| ASTM   Class4 | 
                                
| 
				C ≤  | 
			
				Si ≤  | 
			
				Mn ≤  | 
			
				P ≤  | 
			
				S ≤  | 
			Cr | Ni | 
|---|---|---|---|---|---|---|
| 0.65-1.1 | 14.2-14.75 | 1.5 | ≤0.5 | |||
| Mo | Al | Cu | Nb | Ti | V | Ce | 
| ≤0.5 | ≤0.5 | |||||
| N | Co | Pb | B | Other | ||
| Yield Rp0.2 (MPa)  | 
                                            Tensile Rm (MPa)  | 
                                            Impact KV/Ku (J)  | 
                                            Elongation A (%)  | 
                                            Reduction in cross section on fracture Z (%)  | 
                                            As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 271 (≥) | 718 (≥) | 41 | 44 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 433 | 
| Temperature (°C)  | 
                                        Modulus of elasticity (GPa)  | 
                                        Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C)  | 
                                        Specific thermal capacity (J/kg·°C)  | 
                                        Specific electrical resistivity (Ω mm²/m)  | 
                                        Density (kg/dm³)  | 
                                        Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 41 | - | - | 0.22 | - | |||
| 977 | 345 | - | 11.3 | 142 | - | ||
| 923 | - | 44 | 41.2 | 232 | 143 | 
Heat treated : 1295°C - 1465°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| ASTM 1030 | ASTM | USA | General use carbon steel bar | 
| ASTM 1005 | ASTM | USA | General use carbon steel bar | 
| ASTM 1006 | ASTM | USA | General use carbon steel bar | 
| ASTM 1008 | ASTM | USA | General use carbon steel bar | 
| ASTM 1010 | ASTM | USA | General use carbon steel bar | 
| ASTM 1013 | ASTM | USA | General use carbon steel bar | 
| ASTM 1015 | ASTM | USA | General use carbon steel bar | 
| ASTM 1016 | ASTM | USA | General use carbon steel bar | 
| ASTM 1017 | ASTM | USA | General use carbon steel bar | 
| ASTM 1018 | ASTM | USA | General use carbon steel bar | 
| ASTM 1019 | ASTM | USA | General use carbon steel bar | 
| ASTM 1020 | ASTM | USA | General use carbon steel bar | 
| ASTM 1021 | ASTM | USA | General use carbon steel bar | 
| ASTM W1-A | ASTM | USA | Carbon tool steel | 
| ASTM A182 F55 | ASTM | USA | Super Duplex | 
| ASTM 431 | ASTM | USA | Martensitic special steel | 
| ASTM 440A | ASTM | USA | Martensitic special steel | 
| ASTM 440B | ASTM | USA | Martensitic special steel | 
| ASTM 440C | ASTM | USA | Martensitic special steel | 
| ASTM 501 | ASTM | USA | Martensitic special steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION