ASTM Ⅱ C 15%Cr-Mo-Hc Mould Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Mould Steel | ASTM Ⅱ C 15%Cr-Mo-Hc | |||
ASTM Ⅰ B Ni-Cr-Lc |
|||||
UNS F45001 |
|||||
ASTM Ⅰ C Ni-Cr-GB |
|||||
UNS F45002 |
|||||
ASTM Ⅰ D Ni-HiCr |
|||||
UNS F45003 |
|||||
ASTM Ⅱ A 12%Cr |
|||||
UNS F45004 |
|||||
ASTM Ⅱ B 15%Cr-Mo |
|||||
UNS F45005 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
2.8-3.6 | 1.0 | 2.0 | 0.1 | 0.06 | 14.0-18.0 | ≤0.5 |
Mo | Al | Cu | Nb | Ti | V | Ce |
2.3-3.5 | ≤1.2 | |||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
342 (≥) | 714 (≥) | 14 | 22 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.31 | - | |||
692 | 765 | - | 32.3 | 333 | - | ||
828 | - | 41 | 31.2 | 441 | 341 |
Heat treated : 1683°C - 1119°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1030 | ASTM | USA | General use carbon steel bar |
ASTM 1005 | ASTM | USA | General use carbon steel bar |
ASTM 1006 | ASTM | USA | General use carbon steel bar |
ASTM 1008 | ASTM | USA | General use carbon steel bar |
ASTM 1010 | ASTM | USA | General use carbon steel bar |
ASTM 1013 | ASTM | USA | General use carbon steel bar |
ASTM 1015 | ASTM | USA | General use carbon steel bar |
ASTM 1016 | ASTM | USA | General use carbon steel bar |
ASTM 1017 | ASTM | USA | General use carbon steel bar |
ASTM 1018 | ASTM | USA | General use carbon steel bar |
ASTM 1019 | ASTM | USA | General use carbon steel bar |
ASTM 1020 | ASTM | USA | General use carbon steel bar |
ASTM 1021 | ASTM | USA | General use carbon steel bar |
ASTM W1-A | ASTM | USA | Carbon tool steel |
ASTM A182 F55 | ASTM | USA | Super Duplex |
ASTM 431 | ASTM | USA | Martensitic special steel |
ASTM 440A | ASTM | USA | Martensitic special steel |
ASTM 440B | ASTM | USA | Martensitic special steel |
ASTM 440C | ASTM | USA | Martensitic special steel |
ASTM 501 | ASTM | USA | Martensitic special steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION