ASTM CA-15 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Carbon Steel | ASTM CA-15 | |||
| ASTM   CF-16Fa | 
                                |||||
| 19Cr-10Ni(Cutting type) | 
                                |||||
| ASTM   CH-10 | 
                                |||||
| 25Cr-12Ni | 
                                |||||
| ASTM   CH-20 | 
                                |||||
| 25Cr-12Ni | 
                                |||||
| ASTM   CK-20 | 
                                |||||
| 25Cr-20Ni | 
                                |||||
| ASTM   CE-30 | 
                                |||||
| 29Cr-9Ni | 
                                
| 
				C ≤  | 
			
				Si ≤  | 
			
				Mn ≤  | 
			
				P ≤  | 
			
				S ≤  | 
			Cr | Ni | 
|---|---|---|---|---|---|---|
| 0.15 | 1.5 | 1.0 | 0.04 | 0.04 | 11.5-14.0 | ≤1.0 | 
| Mo | Al | Cu | Nb | Ti | V | Se | 
| ≤0.5 | ||||||
| N | Co | Pb | B | Other | ||
| Yield Rp0.2 (MPa)  | 
                                            Tensile Rm (MPa)  | 
                                            Impact KV/Ku (J)  | 
                                            Elongation A (%)  | 
                                            Reduction in cross section on fracture Z (%)  | 
                                            As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 377 (≥) | 837 (≥) | 44 | 24 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 | 
| Temperature (°C)  | 
                                        Modulus of elasticity (GPa)  | 
                                        Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C)  | 
                                        Specific thermal capacity (J/kg·°C)  | 
                                        Specific electrical resistivity (Ω mm²/m)  | 
                                        Density (kg/dm³)  | 
                                        Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 41 | - | - | 0.14 | - | |||
| 864 | 293 | - | 12.3 | 144 | - | ||
| 768 | - | 13 | 34.2 | 443 | 144 | 
Heat treated : 1596°C - 1958°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| ASTM 1030 | ASTM | USA | General use carbon steel bar | 
| ASTM 1005 | ASTM | USA | General use carbon steel bar | 
| ASTM 1006 | ASTM | USA | General use carbon steel bar | 
| ASTM 1008 | ASTM | USA | General use carbon steel bar | 
| ASTM 1010 | ASTM | USA | General use carbon steel bar | 
| ASTM 1013 | ASTM | USA | General use carbon steel bar | 
| ASTM 1015 | ASTM | USA | General use carbon steel bar | 
| ASTM 1016 | ASTM | USA | General use carbon steel bar | 
| ASTM 1017 | ASTM | USA | General use carbon steel bar | 
| ASTM 1018 | ASTM | USA | General use carbon steel bar | 
| ASTM 1019 | ASTM | USA | General use carbon steel bar | 
| ASTM 1020 | ASTM | USA | General use carbon steel bar | 
| ASTM 1021 | ASTM | USA | General use carbon steel bar | 
| ASTM W1-A | ASTM | USA | Carbon tool steel | 
| ASTM A182 F55 | ASTM | USA | Super Duplex | 
| ASTM 431 | ASTM | USA | Martensitic special steel | 
| ASTM 440A | ASTM | USA | Martensitic special steel | 
| ASTM 440B | ASTM | USA | Martensitic special steel | 
| ASTM 440C | ASTM | USA | Martensitic special steel | 
| ASTM 501 | ASTM | USA | Martensitic special steel | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION