X5CrNi18-10 X5CrNi18-10 Datasheet
Category Type Steel Grade Standard Country Application
Steel GradesStainless Steel X5CrNi18-10
X70CrMo15
X55CrMo14
X110CrMoV15
X90CrMoV18
X6CrMo17-1
X50CrMoV15
X38CrMoV15
X20CrMo13
X39CrMo17-1
X105CrMo17
Datasheet for:Steel Grades:Stainless Steel:X5CrNi18-10

Chemical composition(mass fraction)(wt.%) of the X5CrNi18-10

 

Si 
Mn 
 P
 S
Cr   Ni  Mo  Other
 0.07  1.00  2.00  0.045  0.015  17.0-19.0  8.00-10.5  ------  N0.11


.

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade X5CrNi18-10

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
612 (≥) 847 (≥) 34 32 44 Solution and Aging, Annealing, Ausaging, Q+T,etc 434
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
12 - -     0.23 -  
346 699 - 34.3 242   -  
614 - 34 22.2   321 424
Heat treated : 1895°C - 1548°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
0Cr18Ni9
Seamless stainless steel tubes for boiler and heat exchanger
X5CrNi18-10
Stainless steels - Technical delivery conditions for drawn wire
1.4301
Stainless steels - Technical delivery conditions for drawn wire
X5CrNi18-10
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4301
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X5CrNi18-10
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4301
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X5CrNi18-10 Suppliers

Haihong International Trade (HK) CO., Limited

Join Supplier: sales@steel-grades.com