Chinese
Available 24/7 at contact@steel-grades.com
SGSG
Post Your Request Now
Toggle menu
Hello, Sign inMy Account

Inconel X750

Favorite Datasheet
SB-637 N07750 Type 1 René88DT
#2-4669 #N07750 #NiCr15Fe7TiAl #X-750

Description

USA SAE SAE AMS 5542N (2007), SAE AMS 5582F (2012), SAE AMS 5598E (2007), SAE AMS 5667N (2015), SAE AMS 5668J (2007), SAE AMS 5669B (1965), SAE AMS 5670F (2005), SAE AMS 5671G (2007), SAE AMS 5698G (2007), SAE AMS 5699G (2007), SAE AMS 5747D (2006), SAE AMS 5779E (2003), SAE AMS 5583E (2013), SAE J 467b (1968), SAE J 470 (1976), Inconel X750 Superalloys Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Superalloys: Inconel X750
Category Class Grade Standard Country Application
Steel GradesSuperalloys Inconel X750 SAE USA Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed

Chemical composition(mass fraction)(wt.%) of the Inconel X750

C Mn Si S P Cu Fe Co Nb Cr Ni Al Ti
≤0.08 ≤1.0 ≤0.5 ≤0.01 ≤0.015 ≤0.5 5.0 -9.0 ≤1.0 0.70 -1.20 14.0 -17.0 70 - ≥ 0.40 -1.00 2.25 -2.75

Mechanical Properties of steel grade Inconel X750

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV/Ku (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
585 (≥) 351 (≥) 11 24 32 Solution and Aging, Annealing, Ausaging, Q+T,etc 241

Physical Properties of steel grade Inconel X750

Temperature
(°C)		 Modulus of elasticity
(GPa)		 Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)		 Specific thermal capacity
(J/kg·°C)		 Specific electrical resistivity
(Ω mm²/m)		 Density
(kg/dm³)		 Poisson’s coefficient, ν
31 - -     0.11 -  
311 526 - 22.3 331   -  
975 - 21 24.2   313 123

Heat Treatment of steel grade Inconel X750

Heat treated : 1673°C - 1355°C

Technological Curves of steel grade Inconel X750

Cross Reference Table (Equivalent Grade) of Inconel X750

Grade Standard Country Application
N07750
N07750
UNS N07750
UNS N07750
INCONEL alloy X-750
Inconel X-750
Inconel X-750

Relevant standard of Inconel X750

SAE AMS 5542N (2007) Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed SAE-AMS-5542N-(2007).pdf
SAE AMS 5582F (2012) Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength SAE-AMS-5582F-(2012).pdf
SAE AMS 5598E (2007) Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable SAE-AMS-5598E-(2007).pdf
SAE AMS 5667N (2015) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable SAE-AMS-5667N-(2015).pdf
SAE AMS 5668J (2007) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al 2100°F (1149°C) Solution and Precipitation Heat Treated SAE-AMS-5668J-(2007).pdf
SAE AMS 5669B (1965) Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted SAE-AMS-5669B-(1965).pdf
SAE AMS 5670F (2005) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800°F (982°C) Solution Heat Treated, Precipitation-Hardenable SAE-AMS-5670F-(2005).pdf
SAE AMS 5671G (2007) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800°F (982°C) Solution Heat Treated, Precipitation Hardenable SAE-AMS-5671G-(2007).pdf
SAE AMS 5698G (2007) Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable SAE-AMS-5698G-(2007).pdf
SAE AMS 5699G (2007) Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring Temper, Precipitation Hardenable SAE-AMS-5699G-(2007).pdf
SAE AMS 5747D (2006) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable SAE-AMS-5747D-(2006).pdf
SAE AMS 5779E (2003) Alloy Welding Electrodes, Covered, Corrosion and Heat-Resistant 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al - 5.5Fe SAE-AMS-5779E-(2003).pdf
SAE AMS 5583E (2013) Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Vacuum Melted Solution Heat Treated, Precipitation Hardenable to 170 ksi (1172 MPa) Tensile Strength SAE-AMS-5583E-(2013).pdf
SAE J 467b (1968) Special Purpose Alloys ("Superalloys") SAE-J-467b-(1968).pdf
SAE J 470 (1976) Wrought nickel and nickel-related alloys SAE-J-470-(1976).pdf
SB-637 N07750 Type 1 René88DT
Available Suppliers
Jiangyou Longhai Special Steel Co.,Ltd.
Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this Inconel X750?
  • List your company on S&G now? Join
  • Non-paying users only
Top