Available 24/7 at contact@steel-grades.com

Description

UK B.S. BS EN 10028-7, BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 10088-4, BS EN 10088-5, BS EN 10216-5 (2004), BS EN 10217-7, BS EN 10222-5, BS EN 10250-4, BS EN 10253-3, BS EN 10253-4, BS EN 10263-5, BS EN 10269, BS EN 10272, BS EN 10296-2 (2005), BS EN 10297-2 (2005), 1.4307 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4307
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4307 Austenite B.S. UK Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Chemical composition(mass fraction)(wt.%) of the 1.4307

C Si Mn P S Cr Ni Mo N
≤0.03 ≤1.00 ≤2.00 ≤0.045 ≤0.015 17.50 -19.50 8.00 -10.00 ≤ ≥ ≤0.11

Mechanical Properties of steel grade 1.4307

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
477 (≥) 923 (≥) 42 44 11 Solution and Aging, Annealing, Ausaging, Q+T,etc 422

Physical Properties of steel grade 1.4307

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
21 - -     0.13 -  
218 729 - 12.3 411   -  
858 - 33 23.2   324 233

Heat Treatment of steel grade 1.4307

Heat treated : 1737°C - 1419°C

Technological Curves of steel grade 1.4307

Cross Reference Table (Equivalent Grade) of 1.4307

Grade Standard Country Application
X2CrNi18-9
X2CrNi18-9
X2CrNi18-9

Relevant standard of 1.4307

BS EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels BS-EN-10028-7.pdf
BS EN 10088-1 Stainless steels - Part 1: List of stainless steels BS-EN-10088-1.pdf
BS EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes BS-EN-10088-2.pdf
BS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes BS-EN-10088-3.pdf
BS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes BS-EN-10088-4.pdf
BS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes BS-EN-10088-5.pdf
BS EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes BS-EN-10216-5-(2004).pdf
BS EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes BS-EN-10217-7.pdf
BS EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels BS-EN-10222-5.pdf
BS EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels BS-EN-10250-4.pdf
BS EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements BS-EN-10253-3.pdf
BS EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements BS-EN-10253-4.pdf
BS EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels BS-EN-10263-5.pdf
BS EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties BS-EN-10269.pdf
BS EN 10272 Stainless steel bars for pressure purposes BS-EN-10272.pdf
BS EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel BS-EN-10296-2-(2005).pdf
BS EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel BS-EN-10297-2-(2005).pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4307?
  • List your company on S&G now? Join
  • Non-paying users only
Top