Available 24/7 at contact@steel-grades.com

Description

USA UNS SAE AMS 5342E (2006) , SAE AMS 5343E (2006) , SAE AMS 5344F (2007) , SAE AMS 5604G (2013) , SAE AMS 5622F (2013) , SAE AMS 5643/H1150 (2013) , SAE AMS 5643S (2013) , SAE J 467 (1968) , 17-4PH Specialsteel Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 17-4PH
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 17-4PH Precipitation-Hardening UNS USA Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)

Chemical composition(mass fraction)(wt.%) of the 17-4PH

C Si Mn Cr Ni Cu Nb
≤0.07 ≤1.00 ≤1.00 15.00 -17.50 3.00 -5.00 3.00 -5.00 0.15 -1.45

Mechanical Properties of steel grade 17-4PH

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
183 (≥) 197 (≥) 32 44 42 Solution and Aging, Annealing, Ausaging, Q+T,etc 423

Physical Properties of steel grade 17-4PH

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
44 - -     0.12 -  
234 378 - 33.3 324   -  
143 - 31 34.2   134 111

Heat Treatment of steel grade 17-4PH

Heat treated : 1766°C - 1616°C

Technological Curves of steel grade 17-4PH

Cross Reference Table (Equivalent Grade) of 17-4PH

Grade Standard Country Application
17-4PH
17-4PH
17-4PH(630) Steel for Turbine Blades

Relevant standard of 17-4PH

SAE AMS 5342E (2006) Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) SAE-AMS-5342E-(2006)-.pdf
SAE AMS 5343E (2006) Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4) SAE-AMS-5343E-(2006)-.pdf
SAE AMS 5344F (2007) Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength (17-4) SAE-AMS-5344F-(2007)-.pdf
SAE AMS 5604G (2013) Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable SAE-AMS-5604G-(2013)-.pdf
SAE AMS 5622F (2013) Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted SAE-AMS-5622F-(2013)-.pdf
SAE AMS 5643/H1150 (2013) Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing and Rings 16Cr – 4.0Ni – 0.30Cb (Nb) – 4.0Cu Solution and Precipitation Heat Treated (H1150) SAE-AMS-5643-H1150-(2013)-.pdf
SAE AMS 5643S (2013) Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable SAE-AMS-5643S-(2013)-.pdf
SAE J 467 (1968) Special Purpose Alloys ("Superalloys") SAE-J-467-(1968)-.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 17-4PH?
  • List your company on S&G now? Join
  • Non-paying users only
Top