Description
USA YB SAE AMS-QQ-S-763B (1998), A 182/A 182M (2012), A 240/A 240M (2012), A 249/A 249M (2010), A 269 (2010), A 276 (2010), A 312/A 312M (2012), A 314 (2008), A 358/A 358M (2008), A 409/A 409M (2009), A 473 (2009), A 478 (2008), A 479/A 479M (2011), A 511/A 511M (2012), A 554 (2011), A 580/A 580M (2012), A 632 (2009), A 666 (2010), A 774/A 774M (2009), A 778 (2009), A 793 (2009), A 813/A 813M (2009), A 814/A 814M (2008), A 943/A 943M (2009), A 959 (2011), A 965/A 965M (2012), A 988/A 988M (2011), SAE J 405 (1998), 316L Specialsteel Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Datasheet for: Steel Grades:Specialsteel:
316L
Chemical composition(mass fraction)(wt.%) of the 316L
| C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
N |
| ≤0.03 |
≤1.00 |
≤2.00 |
≤0.045 |
≤0.035 |
16.0 -18.0 |
10.0 -14.0 |
2.00 -3.00 |
≤0.10 |
Mechanical Properties of steel grade 316L
Yield
Rp0.2 (MPa) |
Tensile
Rm (MPa) |
Impact
KV/Ku (J) |
Elongation
A (%) |
Reduction in cross section on fracture
Z (%) |
As-Heat-Treated Condition |
Brinell hardness (HBW) |
| 794 (≥) |
242 (≥) |
12 |
43 |
41 |
Solution and Aging, Annealing, Ausaging, Q+T,etc |
143 |
Physical Properties of steel grade 316L
Temperature
(°C) |
Modulus of elasticity
(GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and |
Thermal conductivity
(W/m·°C) |
Specific thermal capacity
(J/kg·°C) |
Specific electrical resistivity
(Ω mm²/m) |
Density
(kg/dm³) |
Poisson’s coefficient, ν |
| 12 |
- |
- |
|
|
0.42 |
- |
|
| 877 |
821 |
- |
24.3 |
344 |
|
- |
|
| 696 |
- |
12 |
42.2 |
|
|
324 |
214 |
Heat Treatment of steel grade 316L
Heat treated : 1734°C - 1158°C
Technological Curves of steel grade 316L
Cross Reference Table (Equivalent Grade) of 316L
Relevant standard of 316L
| SAE AMS-QQ-S-763B (1998) |
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings | SAE-AMS-QQ-S-763B-(1998).pdf |
| A 182/A 182M (2012) |
Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | A-182-A-182M-(2012).pdf |
| A 240/A 240M (2012) |
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | A-240-A-240M-(2012).pdf |
| A 249/A 249M (2010) |
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | A-249-A-249M-(2010).pdf |
| A 269 (2010) |
Seamless and Welded Austenitic Stainless Steel Tubing for General Service | A-269-(2010).pdf |
| A 276 (2010) |
Stainless Steel Bars and Shapes | A-276-(2010).pdf |
| A 312/A 312M (2012) |
Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | A-312-A-312M-(2012).pdf |
| A 314 (2008) |
Stainless Steel Billets and Bars for Forging | A-314-(2008).pdf |
| A 358/A 358M (2008) |
Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | A-358-A-358M-(2008).pdf |
| A 409/A 409M (2009) |
Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service | A-409-A-409M-(2009).pdf |
| A 473 (2009) |
Stainless Steel Forgings | A-473-(2009).pdf |
| A 478 (2008) |
Chromium-Nickel Stainless Steel Weaving and Knitting Wire | A-478-(2008).pdf |
| A 479/A 479M (2011) |
Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | A-479-A-479M-(2011).pdf |
| A 511/A 511M (2012) |
Seamless Stainless Steel Mechanical Tubing | A-511-A-511M-(2012).pdf |
| A 554 (2011) |
Welded Stainless Steel Mechanical Tubing | A-554-(2011).pdf |
| A 580/A 580M (2012) |
Stainless Steel Wire | A-580-A-580M-(2012).pdf |
| A 632 (2009) |
Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service | A-632-(2009).pdf |
| A 666 (2010) |
Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar | A-666-(2010).pdf |
| A 774/A 774M (2009) |
As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures | A-774-A-774M-(2009).pdf |
| A 778 (2009) |
Welded, Unannealed Austenitic Stainless Steel Tubular Products | A-778-(2009).pdf |
| A 793 (2009) |
Rolled Floor Plate, Stainless Steel | A-793-(2009).pdf |
| A 813/A 813M (2009) |
Single- or Double-Welded Austenitic Stainless Steel Pipe | A-813-A-813M-(2009).pdf |
| A 814/A 814M (2008) |
Cold-Worked Welded Austenitic Stainless Steel Pipe | A-814-A-814M-(2008).pdf |
| A 943/A 943M (2009) |
Spray-Formed Seamless Austenitic Stainless Steel Pipes | A-943-A-943M-(2009).pdf |
| A 959 (2011) |
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels | A-959-(2011).pdf |
| A 965/A 965M (2012) |
Steel Forgings, Austenitic, for Pressure and High Temperature Parts | A-965-A-965M-(2012).pdf |
| A 988/A 988M (2011) |
Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | A-988-A-988M-(2011).pdf |
| SAE J 405 (1998) |
Chemical Compositions of SAE Wrought Stainless Steels | SAE-J-405-(1998).pdf |
