Available 24/7 at contact@steel-grades.com

Description

Russia ГОСТ ΧΒГ Carbide for cutting tools and ΧΒГ Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Tool Steel And Hard Alloy: ΧΒГ
Category Type Steel Grade Standard Country Application
Steel GradesTool Steel And Hard Alloy ΧΒГ ГОСТ Russia Carbide for cutting tools
12Χ1
9ΧC
9ΧC
9Г2Ф
9Г2Ф
XГC
XГC
9ΧΒГ
9ΧΒГ
ΧΒГ

Chemical composition(mass fraction)(wt.%) of the ΧΒГ

C(%) Si(%) Mn(%) P(%) S(%) Cr(%) Ni(%) Mo(%) V(%) W(%) Cu(%) Ti(%)
0.90-1.05 0.10-0.40 0.80-1.10 ≤0.030 ≤0.030 0.90-1.20 ≤0.35 ≤0.30 ≤0.15 1.20-1.60 ≤0.30 ≤0.03

Mechanical Properties of steel grade ΧΒГ

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
867 (≥) 121 (≥) 43 12 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 111

Physical Properties of steel grade ΧΒГ

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
14 - -     0.33 -  
399 463 - 21.3 221   -  
895 - 21 22.2   323 343

Heat Treatment of steel grade ΧΒГ

Heat treated : 1679°C - 1863°C

Technological Curves of steel grade ΧΒГ

Cross Reference Table (Equivalent Grade) of ΧΒГ

Grade Standard Country Application
8ΧΦ ГОСТ Russia Carbide for cutting tools
8ΧΦ ГОСТ Russia Carbide for cutting tools
8ΧΦ ГОСТ Russia Carbide for cutting tools
8ΧΦ ГОСТ Russia Carbide for cutting tools
9ΧΦ ГОСТ Russia Carbide for cutting tools
9ΧΦ ГОСТ Russia Carbide for cutting tools
9ΧΦΜ EN Russia Carbide for cutting tools
9ΧΦΜ EN Russia Carbide for cutting tools
11ΧΦ ГОСТ Russia Carbide for cutting tools
11ΧΦ ГОСТ Russia Carbide for cutting tools
13Χ ГОСТ Russia Carbide for cutting tools
13Χ ГОСТ Russia Carbide for cutting tools
ΧΒ4Φ ГОСТ Russia Carbide for cutting tools
ΧΒ4Φ ГОСТ Russia Carbide for cutting tools
9Χ1 ГОСТ Russia Carbide for cutting tools
9Χ1 ГОСТ Russia Carbide for cutting tools
Χ ГОСТ Russia Carbide for cutting tools
Χ ГОСТ Russia Carbide for cutting tools
12Χ1 ГОСТ Russia Carbide for cutting tools
12Χ1 ГОСТ Russia Carbide for cutting tools

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

REQUEST FOR QUOTATION
  • Do you supply this ΧΒГ?
  • List your company on S&G now? Join
  • Non-paying users only
Top