AISI 202 AISI 202 Datasheet
Category Type Steel Grade Standard Country Application
Steel GradesStainless Steel AISI 202 USA
ASTM 5140
AISI 201
Y1Cr17
1Cr17
00Cr12
0Cr13Al
1Cr21Ni5Ti
00Cr18Ni5Mo3Si2
1Cr18Ni11SiA1Ti
0Cr26Ni5Mo2
Datasheet for:Steel Grades:Stainless Steel:AISI 202

Chemical composition(mass fraction)(wt.%) of the AISI 202

AISI Type 202

 

Category Steel
Class Stainless steel
Type Austenitic standard
Common Names Chromium-Manganese-Nickel steel
Designations United States: ASTM A276 , ASTM A314 , ASTM A412 , ASTM A429 , ASTM A473 , ASTM A666 , FED QQ-S-763 , FED QQ-S-766 , FED STD-66 , SAE 30202 , SAE J405 (30202) , UNS S20200

Composition

 

Element Weight %
C  0.15 
Mn  7.5-10.0 
Si  1.00 
Cr  17.0-19.0 
Ni  4.0-6.0 
P  0.06 
S  0.03 
N  0.25  

Mechanical Properties

 

Properties  Conditions
T (°C) Treatment
Density (×1000 kg/m3) 7.8 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 515 25 annealed (sheet, strip) more
Yield Strength (Mpa) 275
Elongation (%) 40 
Reduction in Area (%)   

Thermal Properties

 

Properties  Conditions
T (°C) Treatment
Thermal Expansion (10-6/ºC) 17.5 0-100 more  
Thermal Conductivity (W/m-K) 16.2 100 more  
Specific Heat (J/kg-K) 500 0-100   

Electric Properties

 

Properties  Conditions
T (°C) Treatment
Electric Resistivity (10-9W-m) 690 25  


.

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade AISI 202

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
462 (≥) 558 (≥) 14 12 13 Solution and Aging, Annealing, Ausaging, Q+T,etc 432
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
33 - -     0.24 -  
747 772 - 21.3 322   -  
364 - 41 14.2   332 441
Heat treated : 1127°C - 1477°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
A-2
Applied to the thermosetting plastic mold, the hardened mould as a whole
Y1Cr18Ni9
Improve the machinability, ablation resistance. Suitable for automatic lathe production of bolt and nut
1Cr18Ni9
High strength after cold forming, but elongation than 1 cr17ni7 slightly worse. Used in architectural decoration parts
1Cr18Mn10Ni5Mo3N
Of urea with good corrosion resistance, can produce urea corrosion of the equipment.
1Cr17Ni7
High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc
Y1Cr18Ni9Se
Improve the machinability, ablation resistance. Suitable for automatic lathe production of rivets, screws
0Cr18Ni9
Seamless stainless steel tubes for boiler and heat exchanger
00Cr19Ni10
Carbon content lower than 0Cr19ni9 steel, excellent intergranular corrosion resistance, is used for welding after the class is not processed parts
1Cr17Mn6Ni5N
Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc
1Cr18Mn8Ni5N
Nickel steel, instead of 1cr18ni9
0Cr19Ni9N
Based on 0cr19ni9 plus N, strength increase and the plastic is not down. Reduce the thickness of the material. As a structure with strength components
0Cr19Ni10NbN
Based on zero cr19ni9 plus N and Nb, with better than 0 cr19ni9 properties and USES
00Cr18Ni10N
In 00cr19ni10 adding N, on the basis of the above grades also features, use the same as the 0 cr19ni9n, but better intergranular corrosion resistance
1Cr18Ni12
Compared with 0 cr19ni9, processing low hardenability. Used for spinning processing, special drawing, cold heading
0Cr23Ni13
Corrosion resistance and heat resistance are better than 0cr19ni9
0Cr25Ni20
Oxidation resistance is better than 0cr23ni13. Mostly used as heat resistant steel
0Cr17Ni12Mo2
Seamless stainless steel tubes for boiler and heat exchanger
1Cr18Ni12Mo2Ti
Seamless stainless steel tubes for boiler and heat exchanger
0Cr18Ni12Mo2Ti
Seamless stainless steel tubes for boiler and heat exchanger
A-29 1025
General use carbon steel rod
AISI 202 Suppliers

Haihong International Trade (HK) CO., Limited

Join Supplier: sales@steel-grades.com