GRIDUR 44

This page provides GRIDUR 44 datasheet, GRIDUR 44 mechanical properties, chemical element GRIDUR 44, technical specifications of GRIDUR 44 steel material properties. GRIDUR 44 performance specifications.

Category Class Grade Standard Country Application
Steel GradesMould Steel GRIDUR 44
Datasheet for:Steel Grades:Mould Steel:GRIDUR 44

Chemical composition(mass fraction)(wt.%) of the GRIDUR 44

C
Si
Mn
P
S
Cr Ni
             
Mo Al Cu Nb Ti V Ce
             
N Co Pb B Other CHINA  
        WC 70 D708  
             

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade GRIDUR 44

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
279 (≥) 811 (≥) 41 34 41 Solution and Aging, Annealing, Ausaging, Q+T,etc 332
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
32 - -     0.22 -  
481 989 - 33.3 343   -  
448 - 13 43.2   312 122
Heat treated : 1646°C - 1275°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
00Cr17Ni14Mo2 GB China
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
X2CrNiMo18-14-3 AWS Germany
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
1.4435 AWS Germany
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
Z 3 CND 17-11-02 DIN France
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
TS 60 SS International
Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)
GH3044 GB China
Classification and designation for superalloys and high temperature intermetallic materials
A 176 S44200 SAE USA
Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
S44200 AISI USA
Ferritic Chromium Heat Resisting Steel
A 268 S44300 SAE USA
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
S44300 AISI USA
Ferritic Chromium Copper Heat Resisting Steel
SA-1008 BHS Grade 44[300] AMS USA
Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy With Improved Formability
SA-1008 SHS Grade 44[300] AMS USA
Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy With Improved Formability
SA-268 S44300 AMS USA
Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A 176 S44400 SAE USA
Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A 240 S44400 SAE USA
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A 268 S44400 SAE USA
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A 276 S44400 SAE USA
Stainless Steel Bars and Shapes
A 554 S44400 SAE USA
Welded Stainless Steel Mechanical Tubing
A 580 S44400 SAE USA
Stainless Steel Wire
S44400 AISI USA
Ferritic Chromium Molybdenum Stainless Steel (18Cr-2Mo)
GRIDUR 44 Suppliers

Haihong International Trade (HK) CO., Limited

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
GRIDUR 44 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
TEL:+86-816-3646575 FAX: +86-816-3639422
M/B:+86-15386639257
E-mail: sales@tool-die-steels.com
Website: http://www.tool-die-steels.com/
Join Supplier: sales@steel-grades.com