17-4 PH

This page provides 17-4 PH datasheet, 17-4 PH mechanical properties, chemical element 17-4 PH, technical specifications of 17-4 PH steel material properties. 17-4 PH performance specifications.

Category Class Grade Standard Country Application
Steel GradesHigh Alloy 17-4 PH
Datasheet for:Steel Grades:High Alloy:17-4 PH

Chemical composition(mass fraction)(wt.%) of the 17-4 PH

C
Si
Mn
P
S
Cr Ni
0.04 0.60 0.28     16.0 4.25
Mo Al Cu Nb Ti V Ce
    3.30 0.27      
N Co Pb B Other    
        Fe...    
             

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade 17-4 PH

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
688 (≥) 416 (≥) 31 24 23 Solution and Aging, Annealing, Ausaging, Q+T,etc 413
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
12 - -     0.34 -  
113 665 - 33.3 214   -  
971 - 34 31.2   131 234
Heat treated : 1489°C - 1733°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
A 1028 S17400 SAE USA
Stainless Steel Bars for Compressor and Turbine Airfoils
A 564 S17400 SAE USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A 693 S17400 SAE USA
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A 705 S17400 SAE USA
Age-Hardening Stainless Steel Forgings
A 982 S17400 SAE USA
Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A 988 S17400 SAE USA
Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
F738 Class P1-90 S17400 SAE USA
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
F836 Class P1-90 S17400 SAE USA
Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)
S17400 AISI USA
Precipitation Hardenable Cr-Ni-Cu Stainless Steel (17-4 PH)
SA-564 S17400 AMS USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
SA-693 S17400 AMS USA
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA-705 S17400 AMS USA
Specification for Age-Hardening Stainless Steel Forgings
17-4 PH ASME USA
Chromium-nickel alloy steel bars, rods and forgings, corrosion resistant
17-4PH UNS USA
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)
17-4PH ASTM USA
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)
B 883 MIM-17-4-PH SAE USA
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)
Z6CNU17-04 AFNOR France
PH Stainless Steel
0Cr17Ni7Al GB China
Heat-resisting steel sheets and plates
0Cr17Ni7Al GB China
Heat-resisting steel sheets and plates
A 564 S13800 SAE USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
17-4 PH Suppliers

Haihong International Trade (HK) CO., Limited

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
17-4 PH can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
TEL:+86-816-3646575 FAX: +86-816-3639422
M/B:+86-15386639257
E-mail: sales@tool-die-steels.com
Website: http://www.tool-die-steels.com/
Join Supplier: sales@steel-grades.com