SS 1672

This page provides SS 1672 datasheet, SS 1672 mechanical properties, chemical element SS 1672, technical specifications of SS 1672 steel material properties. SS 1672 performance specifications.

Category Class Grade Standard Country Application
Steel GradesCarbon Steel SS 1672 SS
Datasheet for:Steel Grades:Carbon Steel:SS 1672

Chemical composition(mass fraction)(wt.%) of the SS 1672

Element Weight %
C 0.43-0.50
Mn 0.60-0.90
P 0.04 (max)
S 0.05 (max)

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade SS 1672

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
262 (≥) 744 (≥) 24 34 44 Solution and Aging, Annealing, Ausaging, Q+T,etc 122
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
12 - -     0.12 -  
538 766 - 32.3 134   -  
362 - 12 23.2   413 211
Heat treated : 1476°C - 1882°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
A 213 S21500 SAE USA
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A 959 S21500 SAE USA
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
S21500 AISI USA
Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel
SA-213 S21500 AMS USA
Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
Stainless W SAE USA
Special Purpose Alloys ("Superalloys")
D3 ASTM USA
Cold-Work Tool Steel
M3 ASTM USA
High-Speed Tool Steel
M3 ASTM USA
High-Speed Tool Steel
X165CrMoV12 DIN Germany
High alloyed CrMoV steel for cutting tool and cold work tool steel
1.2601 DIN Germany
High alloyed CrMoV steel for cutting tool and cold work tool steel
SKD-11 JIS Japan
Mainly used for cold working mold: gauge, die for thread rolling, cutting tool for metal, forming roll, die for press.
SS 2310 SS Sweden
Cold work die steel, steel hardenability, quenching tempering hardness, wear resistance, strength are higher than the Cr12.Shape is complex,
X12M GOST Russia
Cold work die steel, steel hardenability, quenching tempering hardness, wear resistance, strength are higher than the Cr12.Shape is complex,
X160CrMoV12 / Z160CDV12 AFNOR France
Cold working alloy tool steels
Y1Cr18Ni9 GB China
Improve the machinability, ablation resistance. Suitable for automatic lathe production of bolt and nut
1Cr18Ni9 GB China
High strength after cold forming, but elongation than 1 cr17ni7 slightly worse. Used in architectural decoration parts
1Cr18Mn10Ni5Mo3N GB China
Of urea with good corrosion resistance, can produce urea corrosion of the equipment.
1Cr17Ni7 GB China
High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc
Y1Cr18Ni9Se GB China
Improve the machinability, ablation resistance. Suitable for automatic lathe production of rivets, screws
0Cr18Ni9 GB China
Seamless stainless steel tubes for boiler and heat exchanger
SS 1672 Suppliers

Haihong International Trade (HK) CO., Limited

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
SS 1672 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
TEL:+86-816-3646575 FAX: +86-816-3639422
M/B:+86-15386639257
E-mail: sales@tool-die-steels.com
Website: http://www.tool-die-steels.com/
Join Supplier: sales@steel-grades.com