Inconel 600

This page provides Inconel 600 datasheet, Inconel 600 mechanical properties, chemical element Inconel 600 , technical specifications of Inconel 600 steel material properties. Inconel 600 performance specifications.

Category Class Grade Standard Country Application
Steel GradesAlloy Steel Inconel 600
Datasheet for:Steel Grades:Alloy Steel:Inconel 600

Chemical composition(mass fraction)(wt.%) of the Inconel 600

 

C
Si
Mn
P
S
Cr Ni+Co
0.15   0.5  1.0  0.04  0.015 14-17   >=72
Mo Al Cu Nb+Ta Ti V Fe
   0.35  0.5  1.0 0.5    6.0-10.0 
N Co Pb B Other    
             
             

 

Inconel 600 metallographic structure:

 

600 for heart cubic lattice structure surface.

 

Inconel 600 resistance to corrosion:

600 alloy for all sorts of corrosive medium have corrosion resistance. Chromium components to the alloy in oxidation conditions than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 201, low carbon) has better corrosion resistance. At the same time, higher nickel content make alloy in reduction conditions and alkaline solution has the very good corrosion resistance, and can effectively prevent the chlorine-iron stress corrosion cracking. 600 alloy in acetic acid, acetic acid, YiSuan, stearic acid, organic acids in has the very good corrosion resistance, in inorganic acid with medium corrosion resistance. In a nuclear reactor and quadratic recycling high purity of the water has the very good corrosion resistance. The performance of the 600 especially is resistant to corrosion of chlorine and dry hydrogen, the application of the temperature of 650 ℃. Under high temperature, annealing state and solid solution treatment of the state in the air in the alloy has the very good antioxidant spalling performance and high strength. The alloy resist ammonia and seepage nitrogen, carburizing atmosphere, but in REDOX conditions changing alternately, alloy will be affected by the partial oxidation corrosion of the medium (such as green death liquid)

 

Inconel 600 application application fields are:

1. The erosion of the atmosphere thermocouple protection tube

2. Of vinyl chloride monomer production: resistance to chlorine, hydrogen, oxidation and carbonization corrosion

3. Uranium oxide into six fluoride: currently, corrosion resistance

4. The production and use of alkali metal corrosion field, especially with the sulfide environment

5. With chlorine legal titanium dioxide

6. Organic or inorganic chloride and the production of fluoride: the chlorine and fluorine corrosion

7. Nuclear reactor

8. Heat treatment furnace curve neck bottle and parts, especially in the carbonization and nitriding atmosphere

9. Petroleum chemical industry in the production of the 700 ℃ catalytic regeneration in the application of the above recommended for alloy 600 for long service life.

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade Inconel 600

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
481 (≥) 998 (≥) 22 31 12 Solution and Aging, Annealing, Ausaging, Q+T,etc 331
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
22 - -     0.42 -  
813 893 - 13.3 213   -  
115 - 33 13.2   442 313
Heat treated : 1758°C - 1434°C
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
HEV2 UNS USA
Steel for exhaust valves
N07002 AISI USA
Steel for exhaust valves
216 YB USA
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA-479 Type XM-17 AMS USA
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
S21600 AISI USA
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A 182 F 46 SAE USA
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A 336 Grade F46 SAE USA
Alloy Steel Forgings for Pressure and High-Temperature Parts
A 965 Grade F46 SAE USA
Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A 167 S30600 SAE USA
Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A 240 S30600 SAE USA
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A 269 S30600 SAE USA
Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A 312 S30600 SAE USA
Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A 358 S30600 SAE USA
Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A 479 S30600 SAE USA
Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A 943 S30600 SAE USA
Spray-Formed Seamless Austenitic Stainless Steel Pipes
A 959 S30600 SAE USA
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A 965 S30600 SAE USA
Steel Forgings, Austenitic, for Pressure and High Temperature Parts
S30600 AISI USA
Stainless steel and heat resistant steel
SA-240 S30600 AMS USA
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA-312 S30600 AMS USA
Specification for Seamless and Welded Austenitic Stainless Steel Pipes
Inconel 600 Suppliers

Haihong International Trade (HK) CO., Limited

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
Inconel 600 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
TEL:+86-816-3646575 FAX: +86-816-3639422
M/B:+86-15386639257
E-mail: sales@tool-die-steels.com
Website: http://www.tool-die-steels.com/
Join Supplier: sales@steel-grades.com